Product Specification S10040220GT GaAs Push Pull, 40 – 1000MHz, 23.0dB min. Gain @ 1GHz, 240mA max. @ 24VDC
FEATURES
• Excellent linearity
• Superior return loss performance • Extremely low distortion • Optimal reliability • Low noise
• Unconditionally stable under all terminations
S10040220GT
APPLICATION
•
40 to 1000 MHz CATV amplifier systems
DESCRIPTION
•
Hybrid Push Pull amplifier module employing GaAs dice
GaAs Push Pull Hybrid 40 – 1000MHz 23.0dB min. Gain @ 1GHz 240mA max. @ 24VDC
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134)
SYMBOL PARAMETER
Vi Vov Tstg Tmb
RF input voltage (single tone)
DC supply over-voltage (5 minutes) storage temperature
operating mounting base temperature
MIN.
- - - 40 - 30
MAX.
75 30 + 100 + 100
UNIT
dBmV V °C °C
CHARACTERISTICS
Table 1: S-Parameter, Noise Figure, DC Current; VB = 24V; Tmb = 30°C; ZS = ZL = 75 Ω
SYMBOL PARAMETER
Gp power gain
1)SL slope FL flatness of frequency
response
S11 input return loss
CONDITIONS
f = 50 MHz
f = 1000 MHz f = 40 to 1000 MHz f = 40 to 1000 MHz
(Peak to Valley)
MIN.TYP. MAX. UNIT
21.7 22.0 22.3 dB 23 23.5 24.0 dB 1.0 1.5 2.0 dB - 1.0 dB S22 output return loss
F noise figure
Itot total current
consumption (DC)
f = 40 to 160 MHz 20.0 - dB f = 160 to 1000 MHz 18.0 - dB f = 40 to 320 MHz 18.0 - dB f = 320 to 1000 MHz 16.0 - dB f = 50 to 1000 MHz - 4.6 6.2 dB
230.0 240.0 mA
Notes:
1) The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
Page 1 of 4
2004 Jun 01 Document Revision Level A
元器件交易网www.cecb2b.com
Product Specification S10040220GT GaAs Push Pull, 40 – 1000MHz, 23.0dB min. Gain @ 1GHz, 240mA max. @ 24VDC
CHARACTERISTICS
Table 2: Distortion data 40 – 870 MHz; VB = 24V; Tmb = 30°C; ZS = ZL = 75 Ω
SYMBOL CONDITIONS
CTB XMOD CSO
132 ch. flat; Vo = 40 dBmV 1) 132 ch. flat; Vo = 40 dBmV 1) 132 ch. flat; Vo = 40 dBmV 1)
MIN. TYP. MAX. UNIT
- - 63 dBc - - 58 dBc - - 59 dBc
Notes:
1) 132 channels, NTSC frequency raster: 55.25 MHz to 865.25 MHz, +40 dBmV flat output level.
Composite Second Order (CSO)
The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB)
The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD)
Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested.
Page 2 of 4
2004 Jun 01 Document Revision Level A
元器件交易网www.cecb2b.com
Product Specification S10040220GT GaAs Push Pull, 40 – 1000MHz, 23.0dB min. Gain @ 1GHz, 240mA max. @ 24VDC
IU1235789EJSTPKCMOQNBRøGDHLFAAll Dimensions in mm:nominalABCDEFG44,613,620,4812,638,144±0,2±0,2±0,5min44,413,419,97,8512,4537,93,953,825,2-4,027,011,15,40,230,422,242,042,294,834,83max44,813,820,98,1512,7538,34,24,225,6-4,427,412,16,20,270,482,843,042,795,335,33±0,15±0,15±0,2Pinning:0510mmscaleINPUTGNDGNDGNDGND+VB+0,2/-0,05±0,2±0,2123456789OUTPUTHIJKLMNO25,44,2UNC6-32±0,2±0,2±0,527,211,65,80,250,452,542,542,545,085,08±0,4±0,02±0,03±0,3±0,5±0,25±0,25±0,25Notes:EuropeanProjectionPQRSTU
Page 3 of 4
2004 Jun 01 Document Revision Level A
元器件交易网www.cecb2b.com
Product Specification S10040220GT GaAs Push Pull, 40 – 1000MHz, 23.0dB min. Gain @ 1GHz, 240mA max. @ 24VDC
DEFINITIONS
Data Sheet Status Objective Product Specification
Preliminary Product Specification
Product Specification Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information
Where application information is given, it is advisory and does not form part of the specification.
Premier Devices reserves the right to make changes without further notice to any products herein.
Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer´s technical experts. Premier Devices does not convey any license under its patent rights nor the rights of others. Premier Devices products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Premier Devices product could create a situation where personal injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or unauthorized application, Buyer shall indemnify and hold Premier Devices and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part.
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
© Premier Devices Germany GmbH 2004
How to contact us: Premier Devices Germany GmbH
Loeffelholzstrasse 20, D-90441 Nuernberg, Germany
Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 9411 198,
Email: sales.germany@premierdevices.com, Internet: http://www.premierdevices.de/
Page 4 of 4
2004 Jun 01 Document Revision Level A
因篇幅问题不能全部显示，请点此查看更多更全内容